Product Application

產品的用途與產品的方案
熱水與供暖系統解決方案

Central heating that consists of a boiler and radiators is one of the most common heating systems used in Europe and the U.S. for houses that do not have district heating. Boiler supplies space heating, domestic hot water, or both. To ensure users safety, comfort and heating efficiency, NTC temperature sensors in the boiler measures water temperature or combustion temperature for best heating control. Temperature sensors usually are placed at different points in boilers detecting temperature of flow and return pipes, of domestic hot water outlet, and of flue gas. THINKING offers NTC temperature sensors with various mounting features to fit different boiler and heating system application requirements.

興勤解決方案
1. NTC Temperature Sensor for Boilers
Immersion Type

THINKING offers a series of immersion type temperature sensors that are suitable for direct contact in the water flow or flue gases. The immersion type sensors can meet various temperature measurement and installation requirements while sharing the same benefits of accurate temperature detection, fast thermal response(< 3 s) , corrosion resistance, and long-term stability. They can be used to measure either water or flue gas temperature to help the controller to increase the heat or to lower temperature.

(a) Short thermal response time in water and easy to screw-in design make the NTC temperature sensor an ideal solution for pipe fluid temperature detection and control. The temperature sensor assembled in a nickel plated brass cap with a G 1/8'' thread, washer and connector, is easy to install.

(b) The small-diameter sensing top design optimizes the response time and is ideal for detecting flue gases in gas boiler. The NTC sensor is assembled in a 316 stainless steel housing with a thread, O-ring and connector for fast and simple installation.

(c) The NTC temperature sensor is with a fast respnse and comes with push-fit mounting design, which offers an installation alternative to screw-in design.

(d) To optimize the thermal response time (< 2 s), the fast response NTC sensor is placed at the small-diameter tip of the 316 stainless steel case. The sensor can be customized with a brass nut or a clip for best fit your mounting requirement. The fast response sensor is perfect for detecting water temperature in gas combi boilers and instant water heaters to ensure user safety during hot shower.

1. NTC Temperature Sensor for Boilers (Surface Contact Type)

To measure the temperature of flow and return pipes, THINKING recommends the clip-on surface mounting temperature sensor with high moisture resistance and high accuracy. The NTC sensor placed in the tip of a small diameter brass housing enables thermal coupling to the metal pipe and thus improves response time (< 2s). The rugged spring clip is very easy to install and it allows the sensor to be secured easily to pipes. The clips are available in 13, 15, 18, 22 to 28 mm diameters to fit various pipes. The sensor with a single clip is also available to meet different installation requirement.

1. NTC Temperature Sensor for Boilers
(Flanged Type)

The NTC temperature sensor is assembled in a 316 stainless steel housing with heat-resistant lead wire that allows the sensor to withstand a high temperature of 250°C. It responds fast to temperature fluctuation and is ideal for measuring flue gas temperature. The flange design allows simple and stable screw-on installation.

2. NTC Temperature Sensor for Underfloor Heating

For houses that incorporate hydronic underfloor heating, the water is heated to a warm temperature from the boiler and circulates in a set of plastic pipes. A temperature sensor is usually mounted under the floor surface to help control the room temperature. We recommend the use of epoxy coating type NTC temperature sensor (NTSE series) with lead wire because it is double insulated and resists to moisture. The lengths of the cable can be customized to fit the application specification.

‧ In addition to temperature sensors, THINKING offers a broad line of circuit protection components to protect the latest  appliances. Click here to see more circuit protection recommendations for home appliances.

‧ Most temperature sensor types can be delivered in various shapes and with a wide choice of casing materials, cable lengths, connectors, terminals and mounting features to meet different application needs. Alternative resistance tolerances, R/T characteristics, resistance ratings, and UL recoginized models are available on request. Please contact us to learn more about temperature sensors.